Strategies for the Design of a Slide-o-Cam Transmission

Simple item page
dc.creatorChablat, Damien
dc.creatorAngeles, Jorge
dc.date2007-05-08
dc.date.accessioned2026-07-07T07:59:58Z
dc.date.available2026-07-07T07:59:58Z
dc.descriptionThe optimization of the pressure angle in a cam-follower transmission is reported in this paper. This transmission is based on Slide-o-Cam, a cam mechanism with multiple rollers mounted on a common translating follower. The design of Slide-o-Cam, a transmission intended to produce a sliding motion from a turning drive, or vice versa, was reported elsewhere. This transmission provides pure-rolling motion, thereby reducing the friction of rack-and-pinions and linear drives. The pressure angle is a suitable performance index for this transmission because it determines the amount of force transmitted to the load vs. that transmitted to the machine frame. Two alternative design strategies are studied, namely, (i) increase the number of lobes on each cam or (ii) increase the number of cams. This device is intended to replace the current ball-screws in Orthoglide, a three-DOF parallel robot for the production of translational motions, currently under development at Ecole Centrale de Nantes for machining applications.
dc.identifierhttps://arxiv.org/abs/0705.1036
dc.identifierhttp://arxiv.org/abs/0705.1036
dc.identifierProceedings of CK2005, International Workshop on Computational Kinematics (10/05/2005) 1-10
dc.identifier.urihttp://salesiana.dossiersoluciones.com/handle/123456789/128570
dc.subjectRobotics
dc.titleStrategies for the Design of a Slide-o-Cam Transmission
dc.typetext

Files

Collections

arXiv