RF Surface Resistance of a HIPped MgB2 Sample at 21 GHz

Simple item page
dc.creatorTajima, T.
dc.creatorKrawczyk, F. L.
dc.creatorLiu, J.
dc.creatorNguyen, D. C.
dc.creatorSchrage, D. L.
dc.creatorSerquis, A.
dc.creatorShapiro, A. H.
dc.creatorNesterenko, V. F.
dc.creatorGu, Y.
dc.date2003-10-09
dc.date.accessioned2026-07-07T02:54:06Z
dc.date.available2026-07-07T02:54:06Z
dc.descriptionMagnesium diboride (MgB2) is attractive for RF cavity application for particle accelerators because it might not show an increase of RF surface losses at high magnetic surface fields, a phenomenon that has prevented high-Tc superconducting materials such as YBCO from being used for this application. We have measured the RF surface resistance (Rs) at 21 GHz of a MgB2 sample fabricated using Hot Isostatic Press (HIP) at 200 MPa and 1000 C. The results show that polishing with 0.1-micron diamond lapping film followed by a 1500-psi DI water rinse in a clean room reduced the Rs by a factor of 6.2 at 15 K and it is the lowest compared to other published data. The Rs data near the lowest temperature (~13 K) scatter between 0.6 and 1.3 mOhm. The penetration depth and energy gap were estimated to be 263 nm and 1.9-2.7, respectively, for the polished surface.
dc.description8 pages, 9 figures, EUCAS2003
dc.identifierhttps://arxiv.org/abs/cond-mat/0310213
dc.identifierhttp://arxiv.org/abs/cond-mat/0310213
dc.identifier.urihttp://salesiana.dossiersoluciones.com/handle/123456789/22411
dc.subjectSuperconductivity
dc.titleRF Surface Resistance of a HIPped MgB2 Sample at 21 GHz
dc.typetext

Files

Collections

arXiv