2026-07-072026-07-07http://salesiana.dossiersoluciones.com/handle/123456789/83721The peak current limit for the Fermilab Linac was recently studied. The purpose was to learn what components of the present Linac can be used for the first stage of a proposed proton driver[1]. For this application the Linac must provide a H- beam in excess of 5000 mA-msec per pulse. The original Fermilab Linac was designed for protons with a peak current of 75 mA and a pulse length of four Booster turns (~10 msec). The high energy replacement was designed for a peak current of 35 mA and a beam pulse length of 50 msec. The present H- source cannot deliver more than ~80 mA which produces 55 mA in the Linac. Using a proton source allows the system to be tested to currents of ~100 mA and pulse lengths long enough to observe the effects of long pulses. This test has shown that the present Linac can accelerate beam having a peak current up to ~85 mA with beam loss comparable to the present Linac operation (~45 mA). The results of the test will be presented.Linac2000 TUD16Accelerator Physicstext