2026-07-072026-07-07http://salesiana.dossiersoluciones.com/handle/123456789/86549The investigations of powerful discharge in high density hydrogen were carried out on an installation with preliminary adiabatic compression. The experiments were performed under the following conditions: stored energy of the capacitive storage - 140-450 kJ, charging voltage - 8.0-14.0 kV, discharge current amplitude- 200-600 kA, current rise rate - 10^9-10^10 A/s. The maximum particle density nmax, achieved just before the discharge, was about 2.0x10^22 cm-3. It was observed one or several compression of the discharge channel. The moments of contractions corresponds a increase of voltage on discharge gap and feature on a curve of a current. Arc parameters were calculated on the basis of the channel model. It was established that increase of the initial density of particles at increase of a current rate of rise results in reduction of arc diameter with increase of channel temperature.12th International Congress on Plasma Physics, 25-29 October 2004, Nice (France)Plasma Physicstext